Micro Apartments Aluminum High Cubicle Wall Partitions Room
Specification of Bunge movable partition:
Bunge movable partition walls is made of high quality anodized
aluminum frame with environmentally composite materials . The
panels move on a ceiling track with no requirement of floor guides
or rails ,
and they have a standard thickness of 65mm , 80mm and 100mm , and a
width up to 1230mm . Maximum height can reach 13meter tall.
The accordion wall panel consists of a series of concave / convex
profile interlocking flat panels and the fast set retractable top
and bottom seals , it provides excellent acoustic insulation
property of from STC - 32 to 53 in laboratory setting. Its high
performance per dollar value and the easiest in-field operation
makes it very suitable for restaurant , schools , office , religion
, hospitals , shopping arcades and many other indoor applications
Retractable room dividers wide of range face finishes are available
: melamine faced MDF or Plywood , fabric , carpet , fabric ,
artificial , leather , wood veneer , high pressure laminate ,
Formica , acoustic panel , white boad ect. , panels may also be
supplied unfinished for field decoration , Standard frame color is
clear anodized aluminum , custom powder coating colors are
Bunge has adopted the advance partition technology of USA , Germany
and Denmark . We have professional staff with more than 10 years of
experience in design , production and installation.
Specifications of partitions:
for Partition Panel
|Panel Width||500 - 1230mm|
|Panel height||2000 - 6000mm|
|Sound proof||36 - 50 db|
|Vertical profile||Anodised aluminum profiles with integrated magnetic|
strip and sealing edges on the inside
|Finish options||Fabric , veneer , HPL melamine , vinyl , carpet , customers own
|Base options||Plywood , Gypsum , steel , MDF|
|Panel weight||25 - 40 kg / sq|
|Pass door selection||door||Single or double door|
1) Constructing location : keep dry , the temperature should be
higher than 10'C , the widest humidity range should confined to 40%
- 60% after construction 24 hours before constructing , the
location should reach the standards as above.
2) Acoustic panels : for the acoustic panels accommodated to the
circumstance of constructing , please place the panels in the
constructing location for 48 hours , check up the type ,
specification and amount of the panels before constructing .
3) Keels : fix the keels on the wall flatly according to the plan ,
the keels should be flat , slick , no rust , no metamorphosis ; the
wall must be construct according to the standards , the keels
suitable install with acoustic panels , leave smaller than 500mm
space between each wooden keel ( smaller than 600mm of light steel
keel ) , install the keels vertically with acoustic panels .
1) Size of wall : all panels should be installed in accordance with
the manufacturers recommendations .
2) Cutting : all necessary hardware and accessories for a complete
job installation are to be furnished by the contractor .
3) Install the acoustic panels : the installation of acoustic
panels should be carried out in a sequence from the left to the
right , from upside to downside , the panels are cut to fit on site
, traditional woodworking tools are suitable for cutting the panels
, if panels are cut using a fine tooth table saw the panels should
be cut face up to avoid scratching and at a much slower speed to
avoid any tearout or chipping .
4) Fix on keel:
a) Wooden keel fixing using nails , staples or screws into prefixed
timber battens on the walls via the tongue and groove joint .
b) Also can fixing by : Light Steel Keel ( size : 18 * 26 * 3000 mm
, use clip ( size : 45 * 38 mm ) to fix. ( needs 2.1 m of keel and
17 clips per m2 )